Mechanical and Aerospace Engineering

Faculty

Yogesh Jaluria
Board of Governors Professor and MAE Chair
Website : http://cronos.rutgers.edu/~jaluria/
Email : jaluria@soemail.rutgers.edu
Phone : (732) 445-2214

Education

Ph.D., Mechanical Engineering, Cornell University
May 1974

M.S., Mechanical Engineering, Cornell University
May 1972

B.S., Mechanical Engineering, Indian Institute of Technology, Delhi
May 1970

Work Experience

Interim Dean, School of Engineering, Rutgers, the State University of New Jersey
July 2008 -
Mech. Engg. Dept., , Piscataway, NJ, 08854

Chairman, Rutgers, the State University of New Jersey, Department of Mechanical and Aerospace Engineering
July 2005 -

Board of Governors Professor, Rutgers, the State University of New Jersey, Department of Mechanical and Aerospace Engineering
October 2001 -

Professor II (Distinguished Professor), Rutgers, the State University of New Jersey, Department of Mechanical and Aerospace Engineering
July 1991 -

Visiting Professor, Indian Institute of Technology, Kanpur, Department of Mechanical Engineering
September 1988 - June 1989

Professor, Rutgers, the State University of New Jersey, Department of Mechanical and Aerospace Engineering
July 1985 - June 1991

Associate Professor, Rutgers, the State University of New Jersey, Department of Mechanical and Aerospace Engineering
July 1982 - June 1985

Assistant Professor, Rutgers, the State University of New Jersey, Department of Mechanical and Aerospace Engineering
July 1980 - June 1982

Assistant Professor (equivalent to Associate Professor in USA), Indian Institute of Technology, Kanpur, Department of Mechanical Engineering
April 1976 - July 1980

Member of Research Staff, A T & T Bell Laboratories, Engineering Research Center
July 1974 - April 1976

Research Assistant and Fellow, Cornell University, Department of Mechanical Engineering
September 1970 - July 1974

Professional Affiliations

Associate Fellow - American Intitute of Aeronautics and Astronautics
July 2005

Member - The Combustion Institute
July 1982

Member - American Physical Society
July 1981

Fellow - American Society of Mechanical Engineers
January 1981

Awards and Honors

Donald Q. Kern Award (2007) , American Institute of Chemical Engineers
April 2008
Outstanding achievement in heat transfer or energy conversion

Classic Paper Award, Heat Transfer Division (2007) , ASME
November 2007
Recognition of past exceptional papers and authors.

Hawkins Memorial Lecture (2006) , Purdue University
October 2006
Annual lecture in Heat Transfer at Purdue University

Robert Henry Thurston Lecture Award (2003) , American Society of Mechanical Engineers
November 2003
Lecture entitled "Buoyancy-Induced Flows in Nature and Technology," presented at IMECE 2003.

Max Jakob Memorial Award (2002) , American Society of Mechanical Engineers and American Institute of Chemical Engineers
July 2002
Eminent achievement in the field of Heat Transfer

Named Board of Governors Professor of Mechanical and Aerospace Engineering , Rutgers University
October 2001
"Pioneering and lasting contributions in a wide variety of fundamental and applied areas in fluid mechanics and heat transfer"

Freeman Scholar (2000) , American Society of Mechanical Engineers
November 2000
Freeman Scholar for the application entitled "Fluid Flow Phenomena in Materials Processing"

The Worcester Reed Warner Medal (1999) , American Society of Mechanical Engineers
November 1999
Outstanding contribution to the permanent literature of engineering

Heat Transfer Memorial Award for Science (1995) , American Society of Mechanical Engineers
July 1995
Significant research contributions to the science of heat transfer

Distinguished Alumni Award (1994) , Indian Institute of Technology
May 1994

Fellow , American Society of Mechanical Engineers

Certificate of Recognition , National Bureau of Standards
December 1982
Research on fire-induced flows in a room

The Young Scientist Medal and Award (1979) , Indian National Science Academy
January 1979
Research in the area of Natural Convection

McMullen and Cornell Graduate Fellowships (1972-74) , Cornell University
July 1972

Institute Silver Medal and Certificate of Merit (1970) , Indian Institute of Technology
August 1970
Standing first in Mechanical Engineering

National Science Talent Scholarship and Certificate of Merit (1965) , National Council of Educational Research and Training (NCERT)
April 1965

Editorship

ASME Journal of Heat Transfer, American Society of Mechanical Engineers
Editor
July 2005

International Journal for Computational Methods in Engineering Science and Mechanics, Taylor & Francis
Member, Editorial Board

International Journal of Heat and Mass Transfer, and of International Communications in Heat and Mass Transfer, Elsevier
Member, Editorial Advisory Board

Computational Mechanics, Springer-Verlag
Editor
July 2000 - June 2006

Int. Series on Developments in Heat Transfer, Computational Mechanics Pubs.
Associate Editor

ASME Journal of Heat Transfer, American Society of Mechanical Engineers
Associate Technical Editor (Special Projects)

Computational Mechanics, Springer-Verlag
Managing Editor

ASME Journal of Heat Transfer, American Society of Mechanical Engineers
Associate Technical Editor

SADHANA, an international journal on engineering sciences, Indian Academy of Sciences
Member, Editorial Board

International Journal of Numerical Methods for Heat and, Wiley
Member, Editorial Board

Numerical Heat Transfer, Taylor & Francis
Member, Editorial Advisory Board

International Advisory Board for several international conferences,
Member

Students Advised

N. Verma - Experimental Study of the Interactions of Simulated Electronic Components Mounted in a Rectangular Duct
- January 2005

R. Viswanath - Knowledge-Based CAD of Ingot Castings
- May 1989

D. Lombardi - Computer-Aided Design of Thermal Manufacturing Systems Using Knowledge-Based Methodology
- October 1988

E. Papanicolaou - Numerical Study of the Effect of a Forced Flow on Buoyancy-Induced Transport Due to Isolated Heat Sources in a Rectangular Enclosure
- October 1988

A. Abib - Penetration of a Buoyancy Driven Wall Flow into a Stably Stratified Region
- May 1987

D. Goldman - An Experimental Investigation of Negatively Buoyant Flows Generated in Enclosure Fires
- June 1985

S. Goel - An Experimental Study of Non-Boundary Layer Effects Due to Finite Sized Thermal Sources on a Flat Unheated Surface
- December 1984

R. Agarwal - Thermal Plume Interaction with Vertical Surfaces
- October 1984

B.T. O'Mara - The Two-Dimensional Horizontally Discharged Buoyant Water Jet
- October 1983

A.P. Singh - An Analysis of the Heat Transfer Processes in a Continuous Feeding System
- July 1980

K. Himasekhar - An Analytical and Experimental Study of Laminar Free Boundary Flows in a Stratified Medium
- July 1980

V. Baya - Knowledge-Based Design Methodology for a Partially Decoupled Manufacturing Process
- October 1989

X.G. Wang - Knowledge-Based Methodology for the Design and Optimization of a Continuous Casting Manufacturing Process
- October 1989

K. Rattan - Simulation of Optical Fiber Coating Die and Applicator
- October 2000

G. Tamm - Smoke Spread in Open Vertical Shafts
- October 1998

W.K.-S. Chiu - Heat Transfer in Horizontal and Vertical CVD Reactors
- January 1997

Y. Liu - Analysis of the Flow and Heat Transfer in the Solid Conveying Region During Extrusion of Food Materials
- May 1996

G.P. Mercier - Fire-Induced Flow of Smoke and Hot Gases in Vertical Shafts
- January 1996

A. Gupta - Forced Convective Liquid Cooling of Arrays of Protruding Heated Elements Mounted in a Rectangular Duct
- October 1995

M. Phipps - Experimental Investigation of the Helium Smoke Simulator
- October 1994

S. Roy Choudhury - Heat Transfer from a Moving Rod in Aiding or Opposing Forced Flow
- October 1992

Q. Tan - Flow Exchange Through Horizontal Vents in Compartment Fires
- October 1991

V. Jamalabad - Heuristic Design of Engineering Process Components
- October 1990

S. Satyanarayana - An Experimental Study of the Thermal Characteristics of a Laminar Buoyant Jet
- November 1979

R.C. Sehgal - Analysis of Heat Rejection to Water Bodies
- September 1978

S.K. Tiwary - An Analytical Study of Thermal Effects of Heat Rejection from Power Plants to Cooling Ponds
- July 1978

S. Lee - Transport Processes in the Neck-Down Region During the Drawing of an Optical Fiber
- October 1993

R. Viswanath - Modeling, Simulation and Design of Solidification Systems
- May 1993

A. Abib - Penetrative and Recirculating Flows in Enclosures with Openings
- May 1992

T. Sastrohartono - Finite Element Analysis of Transport Processes in Single- and Twin-Screw Extruders
- January 1992

E. Papanicolaou - Mixed Convection from Isolated Sources in a Cavity: A Study of Various Regimes and Configurations
- October 1991

M. Gupta - Development of Shape Functions for Multivariant Finite Elements for Three- Dimensional Flow Analysis of Non-Newtonian Fluids for Polymer Processing
- October 1990

B. H. Kang - Conjugate Heat Transfer from a Continuously Moving Material and from an Isolated Heat Source
- May 1990

M.V. Karwe - Thermal Transport Between a Continuously Moving Surface and a Quiescent Ambient Medium
- October 1987

C.K. Cha - An Analytical and Numerical Study of Mixed Convection in an Enclosure
- October 1983

N. Ramachandran - A Study of Solidification in an Enclosed Region with Natural Convection in the Melt
- March 1981

R. Chiruvella - Heat Transfer in Non-Newtonian Fluid Flow in Complex Passages
- January 1995

S. Roy Choudhury - Thermal Transport in the Optical Fiber Drawing Process
- May 1995

A.V.A. Swamy - A Study of Axisymmetric Natural and Mixed Convection Flows
- July 1978

V. Prasad - Film Condensation on Horizontal Surfaces
- July 1978

S.Y. Yoo - Numerical Study of Flow and Heat Transfer in Optical Fiber Applicator and Die Systems for design and Optimization
- October 2005

T. Icoz - Design of Air Cooling for Electronic Equipment using Concurrent Numerical and Experimental Inputs
- October 2005

Q. Wang - Instability and Heat Transfer in Mixed Convection Flow in a Horizontal Duct with Application to Cooling of Electronic Systems
- October 2002

X. Cheng - Design and Optimization of the Draw Furnace for High Speed Optical Fiber Drawing
- May 2002

W. Zhu - Modeling and Simulation of Twin-Screw Extrusion
- January 2000

W. Chiu - Simulation, Design and Optimization of Chemical Vapor Deposition Systems for Advanced Materials
- October 1999

Z. Yin - Numerical Investigation of Thermal Transport in Optical Fiber Drawing Processes
- October 1997

P. Lin - Flow and Heat Transfer in Polymer Melt Flow With and Without Solidification
- January 1996

S.K. Gupta - Transient Effects in an Enclosed Water Body due to Thermal Discharge
- June 1979

Publications

Mercury and Freon: Temperature Emulation and Management in Server Systems

Optimization of Chemical Vapor Deposition Process

Optimization of the Chemical Vapor Deposition Process for the Fabrication of Thin Films

Isothermal flow in an Optical Fiber Coating Applicator and Die System

Fluid flow and heat transfer in an optical fiber coating process

Conjugate heat transfer in an optical fiber coating process

Effect of furnace thermal configuration on optical fiber heating and drawing

Numerical simulation of boundary conditions and the onset of instability in natural convection due to protruding thermal sources in an open rectangular channel

Three Dimensional Conjugate Heat Transfer in a Horizontal Duct with Discrete Heating

Feasibility of high speed furnace drawing of optical fibers

Design of cooling systems for electronic equipment using both experimental and numerical inputs

Convection in a horizontal duct under constant and variable property formulations

Simulation of the flow in a coating applicator for optical fiber manufacture

Thermal processing of materials: From basic research to engineering

Control of thin film growth in chemical vapor deposition manufacturing systems

Effect of draw furnace geometry on high-speed optical fiber manufacturing

Instability and heat transfer in mixed convection in a horizontal duct with discrete heat sources

Thermal aspects in the continuous Chemical Vapor Deposition of silicon

Unsteady mixed convection in a horizontal channel with protruding heated blocks and a rectangular vortex promoter

Steady and transient flow of a non-Newtonian chemically reactive fluid in a twin-screw extruder

Flow through a horizontal vent in an enclosure fire

Transport processes and feasible operating domain in a twin-screw polymer extruder

Fluid flow phenomena in materials processing - The 2000 Freeman Scholar Lecture

Residence time and conversion in the extrusion of chemically reactive materials

Experimental and numerical study of conjugate heat transfer in a horizontal channel heated from below

Continuous chemical vapor deposition processing with a moving finite thickness susceptor

Neck down and thermally induced defects in high speed optical fiber drawing

Numerical simulation of chemical vapor deposition processes under variable and constant property approximations

Flow structure and heat transfer in a horizontal converging channel heated from below

Generation of neck-down profile for furnace drawing of optical fiber

Modeling and simulation of the solids conveying and unfilled regions in polymer extrusion

Fire-induced flow of smoke and hot gases in open vertical enclosures

Effect of buoyancy, susceptor motion, and conjugate transport in chemical vapor deposition systems

Semi-implicit FEM analysis of natural convection in freezing water

Practical aspects in the drawing of an optical fiber

Thermal transport due to material and gas flow in a furnace for drawing an optical fiber

Transport processes across a horizontal vent due to density and pressure differences

Numerical modeling of materials processing systems

Forced convective liquid cooling of arrays of protruding heated elements mounted in a rectangular duct

Conjugate thermal transport in the channel of an extruder for non-Newtonian fluids

Thermal interaction between isolated heated electronic components in pulsating channel flow

Basic considerations in combined buoyancy-induced and forced flow in a vertical open shaft

Thermal transport and material flow in high speed optical fiber drawing

Design and Optimization of Thermal Systems

Simulation of the transport processes in the neck-down region of a furnace drawn optical fiber

Conjugate transport in polymer melt flow through extrusion dies

Heat transfer and solidification of polymer melt flow in a channel

Zonal method to model radiative transport in an optical fiber drawing furnace

Helium-based simulation of smoke spread due to fire in enclosed spaces

Generation of stable thermal stratification in a partially enclosed space due to a room fire

Numerical simulation of the extrusion process for food materials in a single-screw extruder

Extrusion of non-Newtonian fluids in a single-screw extruder with pressure back flow

Flow and heat transfer due to a buoyant ceiling jet turning downward at a corner

Transport in a twin-screw extruder for the processing of polymers

Temperature distribution in an optical fiber draw tower furnace

Heat and mass transfer in the extrusion of non-Newtonian materials

Effects of variable properties and viscous dissipation during optical fiber drawing

Penetrative flow due to an isothermal vertical wall in a stable two-layer environment generated by a room fire

Numerical approach to model heat transfer in polymer melts flowing in constricted channels

Numerical simulation of fluid flow and heat transfer in a single screw extruder with different dies

Cylinder moving in pressure- and buoyancy-induced channel flow: A numerical study of transport due to three aiding/opposing mechanisms

Co-ordinate system independence of shear rate during isothermal single-screw extrusion of a Newtonian fluid

Numerical study of conjugate transient solidification in an enclosed region

A numerical and experimental study of three-dimensional transport in the channel of an extruder for polymeric materials

Penetrative convection in a stably stratified enclosure

Effects of streamwise convergence in radius on the laminar forced convection in axisymmetric ducts

The effects of geometry and temperature variations on the radiative transport during optical fiber drawing

Numerical simulation of fluid flow and heat transfer in twin-screw extruders for non-Newtonian materials

Computation of turbulent flow in mixed convection in a cavity with a localized heat source

Turbulent penetrative and recirculating flow in a compartment fire

Flow of smoke and hot gases across horizontal vents in room fires

Experimental study of the convective cooling of a heated continuously moving material

Analytical solution for the transient temperature distribution in a moving rod or plate of finite length with surface heat transfer

Numerical coupling of multiple region simulations to study transport in a twin-screw extruder

Convective heat transfer from a continuously moving material in a parallel channel flow for thermal processing

Forced convective heat transfer from a continuously moving heated cylindrical rod in materials processing

Forced convective cooling of optical fiber during drawing process

Computational heat transfer

Heuristic design for a material processing component

Transport in non-Newtonian fluids undergoing thermal processing

Mixed convection from simulated electronic components at varying relative positions in a cavity

Computational study of transport processes in a single-screw extruder for non-Newtonian chemically reactive materials

Rule Based Design of a Material Processing Components

Penetrative convection of a plane turbulent wall jet in a two-layer thermally stable environment : A problem in enclosure fires

Thermal modeling of the continuous casting process

Numerical and experimental investigation of three-dimensional flow in extrusion dies

Mixed convection from a localized heat source in a cavity with conducting walls: A numerical study

A comparison of different solution methodologies for melting and solidification problems in enclosures

MSG: A computer system for automated modeling of heat transfer

Heat and mass transfer in a single screw extruder for non-Newtonian materials

Transport from continuously moving materials undergoing thermal processing

Multivariant finite elements for three-dimensional simulation of viscous incompressible flows

Experimental investigation of thermal transport from a heated moving plate

A numerical study of the fluid flow and heat transfer due to a heated plate moving in a uniform forced flow

Transition to a periodic regime in mixed convection in a square cavity

Wall and corner flows driven by a ceiling jet in an enclosure fire

Simulation of the transport processes in a thermal manufacturing system using symbolic computation

Numerical Simulation of conjugate transport from a continuous moving plate in materials processing

Knowledge-based system for the computer aided design of ingot casting processes

Convective heat transfer with buoyancy effects from thermal sources on a flat plate

Use of expert systems in the design of thermal equipment and processes

Numerical simulation of thermal transport associated with a continuously moving flat sheet in materials processing

Numerical simulation of fluid flow and heat transfer in a single screw extruder for non-Newtonian fluids

Natural convection heat transfer characteristics of a protruding thermal source located on horizontal and vertical surfaces

Mixed convection transport from a protruding heat source module on a vertical surface

Mixed convection transport from an isolated heat source module on a horizontal plate

Mixed convection heat transfer from thermal sources mounted on horizontal and vertical surfaces

Calibration of constant-temperature hot-wire anemometers for very low velocities in air

Mixed convection from an isolated source in a rectangular enclosure

Deflection of a two-dimensional natural convection wake due to the presence of a vertical surface in close proximity

Heat transfer from a negatively buoyant wall jet

Thermal field in a water body for solar energy storage and extraction due to a buoyant two-dimensional surface water jet

Negatively buoyant wall flows generated in enclosure fires

Numerical simulation of the transport processes in a heat treatment furnace

Numerical simulation of the buoyancy-induced flow in a partially open enclosure

An experimental study of the generation and characteristics of a two-layer thermally stable environment

Buoyancy-Induced Flows and Transport

Computer Methods for Engineering

Fluid flow and mixed convection transport from a moving plate in rolling and extrusion processes

Importance of wall flows at the early stages of fire growth in the mathematical modeling of enclosure fires

Computational Heat Transfer

Effect of opposing buoyancy on the flow in free and wall jets

Thermal transport from a heated moving surface

Mixed convection flow over localized multiple thermal sources on a vertical surface

Heat rejection to the surface layer of a solar pond

Interaction of natural convection wakes arising from thermal sources on a vertical surface,

Recirculating mixed convection flow for energy extraction

Effect of thermal buoyancy on the recirculating flow in a solar pond for energy extraction and heat rejection

Numerical study of the thermal processes in a furnace

A numerical study of mixed convection flow in enclosures

Temperature distribution in a moving material subjected to surface energy transfer

Buoyancy induced two-dimensional vertical flows in a thermally stratified environment

On the horizontal recirculation in water bodies due to thermal discharge

Mixed convection in a wall plume

Buoyancy-induced flow due to isolated thermal sources on a vertical surface

Transient film condensation on a finite horizontal plate

Decay of thermal stratification in a water body for solar energy storage

Laminar buoyancy-induced axi-symmetric free boundary flows in a thermally stratified medium

Thermal and fluid flow effects during solidification in a rectangular enclosure

Experiments on solidification with natural convection in a rectangular enclosed region

A study of laminar buoyant jets discharged at an inclination with the vertical buoyancy force

Thermal-plume interaction with vertical surfaces

An experimental and analytical study of thermal stratification in an enclosed water region due to thermal energy discharge

Thermal and fluid flow characteristics in one-dimensional solidification

Transient thermal effects in an enclosed water body due to heated water discharge for heat rejection and solar energy storage

Film condensation on a horizontal isothermal surface

Two-dimensional solidification with natural convection in the melt and convective and radiative boundary conditions

Natural Convection Heat and Mass Transfer

Axisymmetric plume flow in a vertical uniform free stream

Fluid temperature and mixed convection effects in hot-wire measurements of natural convection flows

An experimental study of the interface of a condensing vapor region

Buoyancy-induced flow arising from a line thermal source on an adiabatic vertical surface

On disturbance growth mechanisms in a buoyancy-induced flow

Transient heat transfer in long insulated wires

On the introduction of disturbances in a natural convection flow

Natural convection flow interaction above a heated body

Temperature regulation of a plastic-insulated wire in radiant heating

On the buoyancy-induced flow arising from a heated hemisphere

Vertical natural convection in an adiabatically stratified medium

On transition mechanisms in vertical natural convection flow

Stability and transition of buoyancy induced flows in a stratified medium

An experimental study of non-linear disturbance behavior in natural convection

Thermal effects of power plants on lakes